DSNET V-Lab

Posted: **Wed Aug 17, 2011 5:28 pm**

First let’s install necessary packages on host platform. Execute as root user:

Code: Select all: apt-get install tftpd-hpa nfs-kernel-server apache2

Let’s make public directory for root file system and kernel.

Code: Select all: mkdir -p /var/www/pub/9302 cd /var/www/pub/9302

Extract root file system

Code: Select all: tar -jxvf /angstrom/build/tmp-angstrom_2008_1/deploy/glibc/images/cs-e9302/Angstrom-minimal-osgi-glibc-ipk-2011.03-cs-e9302.rootfs.tar.bz2

We are going to create virtual host for accessing local binary repository from target platform. So edit file

Code: Select all: nano /etc/apache2/sites-available/default

and add the following in the of file

Code: Select all: <VirtualHost *:8080> ServerAdmin webmaster@localhost DocumentRoot /angstrom/build/tmp-angstrom_2008_1/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /angstrom/build/tmp-angstrom_2008_1/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost>

Now restart apache

Code: Select all: /etc/init.d/apache2 restart

We have to make some modifications in target rootfs

Code: Select all: nano /var/www/pub/9302/etc/network/interfaces

and make eth0 with static configuration

Code: Select all: # Wired or wireless interfaces auto eth0 #iface eth0 inet dhcp #iface eth1 inet dhcp iface eth0 inet static address 192.168.1.200 netmask 255.255.255.0 network 192.168.1.0 gateway 192.168.1.1

In this case IP address of target platform will be 192.168.1.200
Also edit /var/www/pub/9302/etc/resolv.conf to point to local DNS.

Next step is to configure feed links in target platform
NOTE:IP address of host platform is 192.168.1.155

Edit file

Code: Select all: nano /var/www/pub/9302/etc/opkg/base-feed.conf

and change feed location from

Code: Select all: src/gz base http://feeds.angstrom-distribution.org/feeds/unstable/ipk/glibc/armv4t/base

to

Code: Select all: src/gz base http://192.168.1.155:8080/deploy/glibc/ipk/armv4t

Edit file

Code: Select all: nano /var/www/pub/9302/etc/opkg/cs-e9302-feed.conf

and change feed location from

Code: Select all: src/gz cs-e9302 http://feeds.angstrom-distribution.org/feeds/unstable/ipk/glibc/armv4t/machine/cs-e9302

to

Code: Select all: src/gz cs-e9302 http://192.168.1.155:8080/deploy/glibc/ipk/cs-e9302

Edit file

Code: Select all: nano /var/www/pub/9302/etc/opkg/noarch-feed.conf

and change feed location from

Code: Select all: src/gz no-arch http://feeds.angstrom-distribution.org/feeds/unstable/ipk/glibc/all

to

Code: Select all: src/gz no-arch http://192.168.1.155:8080/deploy/glibc/ipk/all

For NFS server configuration edit file

Code: Select all: nano /etc/exports

and the following in the end of file

Code: Select all: /var/www/pub 192.168.1.0/24(rw,nohide,no_root_squash,insecure,no_subtree_check,async)

For TFTP server configuration edit file

Code: Select all: nano /etc/default/tftpd-hpa

and the change the line

Code: Select all: TFTP_DIRECTORY="/var/lib/tftpboot"

with this one

Code: Select all: TFTP_DIRECTORY="/var/www/pub"

Restart NFS and TFTP servers

Code: Select all: /etc/init.d/tftpd-hpa restart /etc/init.d/nfs-kernel-server restart

Final step is to run our target platform. Connect RS232_0 serial port of development board to PC with baud rate of 57600. You can use any software for serial communication like PuTTY or SercureCRT(in Windows). Turn on power supply. Press CTRL + C. Use the following Redboot options:

Code: Select all: RedBoot> fconfig -l Run script at boot: true Boot script: .. load -v -r -b 0x80000 -h 192.168.1.155 -m http /pub/9302/boot/zImage .. exec -c "root=/dev/nfs nfsroot=192.168.1.155:/var/www/pub/9302 ip=192.168.1.200:192.168.1.1:255.255.255.0 console=ttyAM0,57600n8" Boot script timeout (1000ms resolution): 5 Use BOOTP for network configuration: false Gateway IP address: 192.168.1.1 Local IP address: 192.168.1.200 Local IP address mask: 255.255.255.0 Default server IP address: 192.168.1.1 DNS server IP address: 192.168.1.1 Set eth0 network hardware address [MAC]: true eth0 network hardware address [MAC]: 0x00:0x00:0x00:0x00:0x54:0x33 GDB connection port: 9000 Force console for special debug messages: false Network debug at boot time: false RedBoot>

In configuration options above linux kernel is loading from host platform through HTTP. In case of using TFTP you should use

Code: Select all: load -v -r -b 0x80000 9302/boot/zImage

Root file system could be loaded from USB flash disk too. Please follow the instructions bellow in order to setup root file system on USB disk.

Code: Select all: mkfs -t ext2 -b 1024 -m 0 /dev/sdb

Let’s turn off checks for problems with file system

Code: Select all: tune2fs -c 0 -i 0 /dev/sdb

Mount the disk

Code: Select all: mount /dev/sdb /mount

Copy file system

Code: Select all: cp -R /var/www/pub/9302/* /mount

Unmount the disk

Code: Select all: umount /dev/sdb

Redboot option to load root file system from USB flash disk is

Code: Select all: exec -c "console=ttyAM0 root=/dev/sda1 rootdelay=6"

Example of successful boot

Code: Select all: Using base address 0x00080000 and length 0x001b4c3c Linux version 2.6.37.2 (user@ubuntu) (gcc version 4.3.3 (GCC) ) #1 Tue Aug 16 03:31:39 EDT 2011 CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 CPU: VIVT data cache, VIVT instruction cache Machine: Cirrus Logic EDB9302 Evaluation Board Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8016 Kernel command line: root=/dev/nfs nfsroot=192.168.1.155:/var/www/pub/9302 ip=192.168.1.200:192.168.1.1:255.255.255.0 console=ttyAM0,57600n8 PID hash table entries: 128 (order: -3, 512 bytes) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 8MB 8MB 8MB 8MB = 32MB total Memory: 28872k/28872k available, 3896k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xc6000000 - 0xfe800000 ( 904 MB) lowmem : 0xc0000000 - 0xc5800000 ( 88 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .init : 0xc0008000 - 0xc0023000 ( 108 kB) .text : 0xc0023000 - 0xc034ee00 (3248 kB) .data : 0xc0350000 - 0xc036a560 ( 106 kB) NR_IRQS:120 VIC @fefb0000: id 0x00041190, vendor 0x41 VIC @fefc0000: id 0x00041190, vendor 0x41 Calibrating delay loop... 99.73 BogoMIPS (lpj=498688) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 ep93xx clock: PLL1 running at 400 MHz, PLL2 at 192 MHz ep93xx clock: FCLK 200 MHz, HCLK 100 MHz, PCLK 50 MHz ep93xx dma_m2p: M2P DMA subsystem initialized bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (extended precision) JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 56 io scheduler noop registered io scheduler deadline registered (default) Serial: AMBA driver apb:uart1: ttyAM0 at MMIO 0x808c0000 (irq = 52) is a AMBA console [ttyAM0] enabled apb:uart2: ttyAM1 at MMIO 0x808d0000 (irq = 54) is a AMBA apb:uart3: ttyAM2 at MMIO 0x808e0000 (irq = 55) is a AMBA physmap platform flash device: 01000000 at 60000000 physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000089 Chip ID 0x000018 Intel/Sharp Extended Query Table at 0x0031 Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Searching for RedBoot partition table in physmap-flash.0 at offset 0xfe0000 7 RedBoot partitions found on MTD device physmap-flash.0 Creating 7 MTD partitions on "physmap-flash.0": 0x000000000000-0x000000040000 : "RedBoot" 0x000000040000-0x000000540000 : "netbsd" 0x000000540000-0x000000a40000 : "netbsd_install" 0x000000a40000-0x000000d40000 : "ramdisk.gz" 0x000000d40000-0x000000ee0000 : "dImage" 0x000000fc0000-0x000000fc1000 : "RedBoot config" mtd: partition "RedBoot config" doesn't end on an erase block -- force read-only 0x000000fe0000-0x000001000000 : "FIS directory" ep93xx-eth version 0.1 loading eth0: ep93xx on-chip ethernet, IRQ 39, 00:00:00:00:54:33 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ep93xx-ohci ep93xx-ohci: EP93xx OHCI ep93xx-ohci ep93xx-ohci: new USB bus registered, assigned bus number 1 ep93xx-ohci ep93xx-ohci: irq 56, io mem 0x80020000 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EP93xx OHCI usb usb1: Manufacturer: Linux 2.6.37.2 ohci_hcd usb usb1: SerialNumber: ep93xx hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver uas Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core ep93xx-rtc ep93xx-rtc: rtc core: registered ep93xx-rtc as rtc0 i2c /dev entries driver ep93xx_wdt: EP93XX watchdog, driver version 0.3 (nCS1 disable detected) TCP cubic registered NET: Registered protocol family 10 NET: Registered protocol family 17 NET: Registered protocol family 15 ep93xx-rtc ep93xx-rtc: setting system clock to 1970-01-01 00:02:00 UTC (120) usb 1-1: new full speed USB device using ep93xx-ohci and address 2 usb 1-1: New USB device found, idVendor=0951, idProduct=1607 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: DataTraveler 2.0 usb 1-1: Manufacturer: Kingston usb 1-1: SerialNumber: 001372982BA9B9519000006C usb 1-1: selecting invalid altsetting 1 scsi0 : usb-storage 1-1:1.0 scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS IP-Config: Guessing netmask 255.255.255.0 IP-Config: Gateway not on directly connected network. sd 0:0:0:0: [sda] 7839744 512-byte logical blocks: (4.01 GB/3.73 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] Attached SCSI removable disk VFS: Mounted root (nfs filesystem) on device 0:12. Freeing init memory: 108K INIT: version 2.86 booting Please wait: booting... Starting udev udevd (257): /proc/257/oom_adj is deprecated, please use /proc/257/oom_score_adj instead. EXT3-fs (sda): error: can't find ext3 filesystem on dev sda. EXT2-fs (sda): error: can't find an ext2 filesystem on dev sda. EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended Root filesystem already rw, not remounting Caching udev devnodes Populating dev cache NOT configuring network interfaces: / is an NFS mount Tue Aug 16 03:47:00 UTC 2011 INIT: Entering runlevel: 5 Creating Dropbear SSH server RSA host key. Will output 1024 bit rsa secret key to '/etc/dropbear/dropbear_rsa_host_key' Generating key, this may take a while... Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgwDdZLxBD/mE091ON8H9+yPw9w67os2sw8YTOO/iNJX4lUzMiikLmKjrypGDdPFd1sLXuZUU+sl64gaovKDUHhoG70+twylyOaVW8i/FABx7qcD42itl1jIS27AETWGiJNopZ2HQQjshjoRwW/DfiPQsihXoaIxcebDsMbvoANe/4YiT root@cs-e9302 Fingerprint: md5 e9:f5:58:62:9c:33:b4:2e:c6:4a:79:80:ba:9a:ea:3b Starting Dropbear SSH server: dropbear. Starting syslogd/klogd: done .-------. | | .-. | | |-----.-----.-----.| | .----..-----.-----. | | | __ | ---'| '--.| .-'| | | | | | | | |--- || --'| | | ' | | | | '---'---'--'--'--. |-----''----''--' '-----'-'-'-' -' | '---' The Angstrom Distribution cs-e9302 ttyAM0 Angstrom 2011.03 cs-e9302 ttyAM0 cs-e9302 login:

DSNET V-Lab

Deployment

Deployment